欧美亚洲视频在线观看,人与野鲁毛片在线

Product Series: Lighting Tile Resin Winding Resin Marine Resin Antiseptic Resin Barcol Hardness Pultrusion Resin Bolt Resin Molding Resin Buttons , Crafts Resin Spray Resin Artificial Stone, Quartz Resin General Purpose Resin Bathroom Resin Vacuum Introduced Resin Flame-retardedResin Modeling Resin

TR-1603

2023-11-07

1、 Features and main uses:

Tianrun TR-1603 is an unsaturated polyester resin (modified) mainly composed of phthalic anhydride and standard diols, which is soluble in styrene. It has low viscosity and high reactivity, excellent flame retardancy, light resistance, water resistance, and weather resistance. After curing, it has high mechanical properties and hardness. Especially suitable for FRP products with high requirements for transparency, light resistance, water resistance, and weather resistance.

Project	Unit	Test indicators	Test method
Appearance	-	Transparent blue viscous liquid	GB/T8237.6.1.1
Viscosity	Pa·s	0.16-0.2	GB/T 7193-2008
Acid Value	mgKOH/g	14-25	GB/T 2895-2008
Gel time	Min（25℃）	8-10	GB/T 7193-2008
Stability	H（80℃）	≥24	GB/T 7193-2008

Note: 25 ℃ gel time test: add 1ml curing agent M-55 and 2ml accelerator RCA to 50g resin in 25 ℃ water bath.

2、 Physical properties of the casting body (for reference only):

Project	Unit	Test Performance	Test Method
Project	Unit	Casting Body	Test Method
Tensile strength	MPa	≥65	GB/T2567-2008
Tensile modulus of elasticity	MPa	≥3500	GB/T2567-2008
Elongation at break	%	≥2.0	GB/T2567-2008
Bending strength	MPa	≥65	GB/T2567-2008
Flexural elastic modulus	MPa	≥4000	GB/T2567-2008
Thermal deformation temperature	℃	≥80	GB/T1634-2004
Bacor hardness	-	≥45	GB/T3854-2005

Note: 1) Casting system sample method according to GB/T8237-2005; Temperature 25℃, curing system: accelerator RCA 1.0%, curing agent M-50 1.5%.

2) Curing after casting: room temperature ×24 hours +60℃×3 hours +80℃×2 hours;

3、Note:

1. Stir well in the packaging bucket before use, or pour out all the resin in the packaging bucket and stir well before use.

2. The transportation shall comply with the transportation and loading provisions of chemical dangerous goods in Chapter 5 of the Regulations on the Safety Administration of Chemical Dangerous Goods of The State Council. The product should be stored in a cool place below 25℃, avoid fire, isolate heat source, and the shelf life below 25℃ is 3 months.

4、Product Safety Data (MSDS) : Before using this product, be sure to read this product MSDS in detail.